Check items to add to the cart or select all
Be the first to review this product
- Front panel buttons and LED display allows the user to set the well temperatures, set the temperature set points, monitor the heater output power, adjust the controllers proportional band and program the calibration parameters
- Calibrator can be set to either °F or °C
- Up to 8 programmable set-points can be stored in memory to be recalled when needed
- Built in calibration procedures allows improvements of the temperature set-point accuracy
- Integrated cover has built in storage inside which can hold the power cord and insert removal tool
- Insert storage can hold up to four additional inserts
- Includes two independently controlled temperature blocks;
- Hot Block provides temperatures from 50°C to 350°C (calibrated within ±0.6°C with a stability of ±0.05°C)
- Cold Block provides temperatures from -15°C to 110°C (calibrated within ±0.2°C with a stability of ±0.05°C)
- Each temperature block has two wells with removable inserts for calibration of up to four probes at once or calibrate two probes with an external reference
- Calibrator is built into a tough Pelican case that is both airtight and watertight and holds cord & inserts
- At only 10 lbs, this rugged system can go anywhere
| Product Includes | two 1/4” inserts, two 3/16” inserts, NIST certification w/Data, windows software, RS-232 cable, insert removal tool and 120V power cord |
| Specifications | Hot Block Range: 50°C to 350°C (122°F to 662°F) |
| size | 7”H x 10.5”W x 9.75”D (10 lb ) |
| Shipping Weight | 12.0000 |
| Power Supply | 115 VAC, 50/60 Hz, 3 A, 250 Watts |
| Manufacturer | HART Scientific |
| MPN | 9009B156 |
| Mitchell Catalog Number | 7c9009Y156,8c9009Y156,9c9009Y156,wb9009Y156,7c9009B156,8c9009B156,9c9009B156,wb9009B156 |
